![]() 03/22/2019 at 11:37 • Filed to: project golf ball | ![]() | ![]() |
Sorry for the blur-o-vision photo
Checked that and it was in spec, which was 470nF . 490nF is within tolerance of both the cap and my crappy meter. I a lso cleaned the main ground, which didn’t help . New ignition module comes in today. Only I could manage to break an 80s Honda.
![]() 03/22/2019 at 11:43 |
|
I am impressed at how you’ve managed so far, for sure.
![]() 03/22/2019 at 12:01 |
|
Are all your connections solid inside the distributor? I had a weird, occasional ignition problem with the racecar once that turned out to be a loose spade terminal inside the distributor . Once I finally figured it out, I crimped the female end of the connector a bit tighter and it has been fine ever since.
![]() 03/22/2019 at 12:06 |
|
If it’s broke, throw parts at it until you are.
![]() 03/22/2019 at 12:09 |
|
I’m really curious to see how this ends, because this sounds an awful lot like what my Raider did does
*I like to pretend it didn’t happen, but after all my work switching to a Weber, it definitely started to miss, exactly like it was with the stock Mikuni.
Also I’m replacing the Volvo’s condenser and points tomorrow or Sunday, hopefully that makes it run....
![]() 03/22/2019 at 12:10 |
|
![]() 03/22/2019 at 12:12 |
|
lol, how is the Volvo anyway?
![]() 03/22/2019 at 12:49 |
|
Do we need to start calling you Jake yet?
![]() 03/22/2019 at 13:25 |
|
Still not running....I have a new condenser and points to install this weekend. If that doesn’t get it strong enough spark, or if it does, and it still doesn’t run, I’m pretty much out of ideas.
![]() 03/22/2019 at 13:45 |
|
LS swap? lol
![]() 03/22/2019 at 15:51 |
|
That is honestly what I'm hoping for. Didn't want to hear into it until I had all the parts, which I will soon.
![]() 03/22/2019 at 16:08 |
|
Nah, if any engine swaps happened it would probably be a B30 from a 164. Or a BMW M20 or M50. But realistically it’ll stick with the same engine, because I don’t have anything close to the space and equipment I’d need to do that
![]() 03/22/2019 at 19:50 |
|
I’d replace it anyway, but bummer it’s not the ‘smoking gun’ you’re hoping for.
![]() 03/22/2019 at 21:10 |
|
Might do. OEM ones are NLA, so I’d have to wing it with a generic replacement, which is fine.
![]() 03/23/2019 at 18:38 |
|
Their stock probably melted, with spring rolling around and their H onda being Part Snow.